440A (UNS S44002)
440A Martensitic Stainless Steel
Introduction
UNS S44002
440A (UNS S44002) is the most rust resistant one of 440 steel series.
Due to high carbon content, it has greater hardenability but weaker weldability than 440B (S44003) and 440C (S44004) in the hardened state. 440A is a low cost stainless steel with moderate corrosion resistance good strength and the ability to obtain and keeps excellent hardness (Rc 56) and wear resistance.
Properties.
Properties
The steels 440A (UNS S44002) is designed to provide stainless properties with maximum hardness and high strength as well as corrosion resistance
in the hardened and stress relieved condition,but it doesn't have full corrosion resistance either in the annealed or in the hardened and tempered condition.
Chemical Composition of 440A (UNS S44002) (%)
Grade C Mn Si P S Cr Mo Ni N
440A min 0.60 -- -- -- -- 16.0 -- -- --
max 0.75 1.0 1.00 0.035 0.03 18.0 0.75 0.60 0.03
Application
440A (UNS S44002) is used where good corrosion resistance along with hardness and abrasion resistance are required.
• ball bearings and races
• gage blocks
• molds and dies
• cutlery and valve components
• knives and measuring instruments.
Please contact our company service (hotline:86 0510-83,632,628) to get more information on 440A (UNS S44002) about selection, application, heat treatment and inventory and other related information,you can also contact us for more information about martensitic stainless steel and stainless steel.
- 【Hits:】 【Add:2013-02-18】 【Close】