630 (UNSS17400)
-
630 Precipitation Hardening Stainless Steel
Introduction
UNS S17400
Precipitation hardening stainless steel 630 (UNS S17400) , commonly called 17-4, is a kind of martensitic one
The high strength and hardness can be gained after heat treatment under low temperature. .
The corrosion resistance of 630 (UNS S17400) is similar to that of 304, and it provides moderate corrosion performance
Properties
and unusually high strength
Chemical Composition of 630 (UNS S17400) (%)
Grade C Mn Si P S Cr Ni Cu
630 min -- -- -- -- -- 15.0 3.0 3.0
max 0.07 1.00 1.00 0.04 0.03 17.5 5.0 5.0
Forging process of 630 (UNS S17400)
Preheat / ℃ heating temperature / ℃ initial forging temperature / ℃ final forging temperature / ℃ Cooling
800 1180 ~ 1200 1150 ~ 1160 ≥ 930 air-cooled
Application
630 (UNS S17400) stainless steel is mainly used for parts with requirements of high strength, weak acid resistance,such as:
plastic mold, turbine parts, shafts and so on.
Please contact our company service (hotline:86 0510-83,632,628) to get more information on selection, application, heat treatment and inventory and other related information about 630 (UNS S17400),you can also contact us for more information about precipitation hardening stainless steel and stainless steel.
- 【Hits:】 【Add:2013-02-18】 【Close】